0704-2440JDCP6517/01

2024年07月18日

1）HIPPS關斷閥執行機構應滿足在450 kPaG氣源壓力和閥門在最大壓差（20900kPa）下，執行機構扭矩不小于 HIPPS閥門從打開位置到關閉所需扭矩的2.5倍。2）從壓力變送器測量值達到其設定值至 HIPPS 關斷閥完全關閉總時間應小于3秒。1）HIPPS shut-off valve actuator should meet the 450 kPaG gas source pressure and the valve in the maximum differential pressure (20900kPa), the actuator torque is not less than HIPPS valve from the open position to close the required torque 2.5 times. 2）The total time from when the measured value of the pressure transmitter reaches its set value to when the HIPPS shut-off valve is completely closed shall be less than 3 seconds.

合同簽訂后9個月內交貨

資格要求：A．如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照；如果投標人為境外注冊公司，需提供有效的公司登記注冊證明。The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined？certificate and business license.The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.？B.HIPPS整撬經第三方頒發（如TUV、Exida、FM或者UL等）SIL3認證證書，投標人承諾交貨后兩個月內提供 HIPPS整撬第三方（如TUV、Exida、FM或者UL等）Sil3證書。HIPPS whole skid by the third party issued (such as TUV, Exida, FM or UL, etc.) SIL3 certificate, the bidder undertakes to provide HIPPS whole skid third party (such as TUV, Exida, FM or UL, etc.) Sil3 certificate within two months after delivery.C.HIPPS所使用邏輯解算器須達SIL3等級，投標時須提供邏輯解算器SIL3證書。HIPPS logic solver used shall reach SIL3 level, the bidding shall provide logic solver SIL3 certificate.D.投標人應為邏輯解算器的制造商或授權集成商，投標時須提供邏輯解算器制造商授權證書。The bidder shall be the manufacturer or authorized integrator of the logic solver, and shall provide the certificate of authorization of the logic solver manufacturer at the time of bidding.E.HIPPS所使用關斷閥須達SIL2級，投標時須提供SIL2認證證書。HIPPS shut-off valves used shall be up to SIL2 level, and SIL2 certification shall be provided at the time of bidding.F.關斷閥執行機構及執行機構電磁閥、執行機構行程開關均需達到SIL3等級,投標時需提供SIL3證書。Shut-off valve actuator and actuator solenoid valve, actuator travel switch are required to meet the SIL3 level, bidding need to provide SIL3 certificate.G.HIPPS閥門必須至少滿足 API 6D 標準要求，并且符合 API 607 或 API6 FA 耐火試驗標準，投標人承諾交貨時須提供API型式認可證書及有效的符合API 607或API6 FA閥門防火認證證書。HIPPS valves must at least meet the requirements of API 6D standards and comply with API 607 or API6 FA fire test standards, the bidder undertakes to deliver the API type approval certificate and a valid certificate of compliance with API 607 or API6 FA valve fire certification.H.HIPPS關斷閥泄漏等級應滿足ISO-5208標準B級要求，投標人承諾交貨時須提供船級社第三方證書。HIPPS shut-off valve leakage level should meet the requirements of ISO-5208 standard class B. The bidder is committed to provide third-party certificates of classification societies at the time of delivery.I.投標人應承諾自行委托國家安全生產監督管理總局海洋石油作業安全辦公室(COOOSO) 認可的下列任一家船級社 (ABS, DNV, BV 和 CCS) 對HIPPS整體進行檢驗并獲得檢驗證書。并將發證機構簽發的設計評審報告和檢驗證書提交買方，投標人承諾交貨后兩個月內須提供船級社 (ABS, DNV, BV 和 CCS) HIPPS整撬檢驗證書。The bidder shall undertake to commission any one of the following Classification Societies (ABS, DNV, BV and CCS) recognized by the Offshore Oil Safety Office (COOOSO) of the State Administration of Work Safety to carry out the inspection of the whole HIPPS and obtain the inspection certificate. The Design Review Report and Inspection Certificate issued by the issuing organization shall be submitted to the buyer, and the bidder undertakes to provide Classification Societies (ABS, DNV, BV and CCS) with the HIPPS whole skid inspection certificate within two months after delivery.

2024年07月18日 至 2024年07月25日

請登錄中國海洋石油集團有限公司采辦業務管理與交易系統（https://buy.cnooc.com.cn）的招標公告頁面進行購買。首次登錄必須先進行注冊（免費），注冊成功后，方可購買招標文件。購買過程必須全程在線操作，線下形式的匯款將不予接受。標書費支付成功后，投標人可自行下載招標文件。售后不退。如未在系統中領購招標文件，不可參加投標。

200.00元

2024年08月08日 09時30分

所有的投標文件必須在投標文件截止時間前在線提交

所有的投標文件必須在投標文件遞交截止時間前在線提交

2024年08月08日 09時30分

中國海油供應鏈數字化平臺

如有內容不一致，以公告附件中的招標公告為準。